Skip to main content

Sallet

Image attached to M.4A-1939

An image of Salet and Bevor
Sallet, with a moveable visor, for heavy field use. Formed of a one-piece skull with a long 'tail' over the neck, and a pivoted demi-visor.  The skull has a rounded crown with a broad, medial keel at its apex, narrowing to a medial ridge at the front and rear.  The centre of the keel is pierced with a large, circular hole between a pair of rivet-holes for the attachment of a threaded boss to receive a crest.  The lower edge of the skull has a plain outward turn except at the front where it is cut away as a shallow face-opening that widens towards the bottom.  The straight upper edge of the face-opening, which is flanged outwards very slightly and decorated at its edge with a single incised line, forms the upper edge of the vision-slit.  Just above the level of the vision-slit, the skull is encircled by a series of twenty-one lining-rivets beneath a single, decorative incised line.  The front nine rivets are externally flush with flat internal heads, while the remainder are round-headed with circular internal washers of which two are missing.  The rivets and washers are all replaced, as are the buff-leather lining-band and the buff-leather loops for chin-straps at either side that they retain.  A similar pair of round-headed rivets with circular internal washers retaining a buff-leather suspension-loop within the nape are likewise replaced.  Five pairs of small holes around the lower edge of the skull and another to either side of the face-opening served to sew in the lining.  A single hole at either side of the face-opening and a corresponding hole at either side of the visor, which served as construction-holes during manufacture, have been plugged with rivets.  At the right lower corner of the face-opening is a push-button-operated spring-catch that engages a hole in the right lower corner of the visor.  The mushroom-shaped push-button is probably replaced, as are the pair of small, round-headed rivets that retain the flat internal spring.  The viso

Terms of use

These images are provided for non-commercial use under a Creative Commons License (BY-NC-ND). To license a high resolution version, please contact our image library who will discuss fees, terms and waivers.

Download this image

Creative commons explained - what it means, how you can use our's and other people's content.

About this image

Salet and Bevor Sallet, with a moveable visor, for heavy field use. Formed of a one-piece skull with a long 'tail' over the neck, and a pivoted demi-visor. The skull has a rounded crown with a broad, medial keel at its apex, narrowing to a medial ridge at the front and rear. The centre of the keel is pierced with a large, circular hole between a pair of rivet-holes for the attachment of a threaded boss to receive a crest. The lower edge of the skull has a plain outward turn except at the front where it is cut away as a shallow face-opening that widens towards the bottom. The straight upper edge of the face-opening, which is flanged outwards very slightly and decorated at its edge with a single incised line, forms the upper edge of the vision-slit. Just above the level of the vision-slit, the skull is encircled by a series of twenty-one lining-rivets beneath a single, decorative incised line. The front nine rivets are externally flush with flat internal heads, while the remainder are round-headed with circular internal washers of which two are missing. The rivets and washers are all replaced, as are the buff-leather lining-band and the buff-leather loops for chin-straps at either side that they retain. A similar pair of round-headed rivets with circular internal washers retaining a buff-leather suspension-loop within the nape are likewise replaced. Five pairs of small holes around the lower edge of the skull and another to either side of the face-opening served to sew in the lining. A single hole at either side of the face-opening and a corresponding hole at either side of the visor, which served as construction-holes during manufacture, have been plugged with rivets. At the right lower corner of the face-opening is a push-button-operated spring-catch that engages a hole in the right lower corner of the visor. The mushroom-shaped push-button is probably replaced, as are the pair of small, round-headed rivets that retain the flat internal spring. The viso

Image data

  • Accession Number: M.4A & B-1939
  • Photograph copyright © The Fitzwilliam Museum, Cambridge
  • Aperture: f/32.0
  • Focal length: 75
  • Camera: Canon EOS 5D
  • Photographer name: Michael Jones
  • Image height: 760 pixels
  • Image width: 521 pixels
  • Processed with: ACD Systems Digital Imaging
  • Filesize: 59.49kB
  • Exposure time: 1/100
  • ISO Speed: 100
  • Fnumber: 32/1
  • Captured: 2008:09:11 12:02:31

Colours in this image

rgb(220,221,217), rgb(85,86,79), rgb(34,36,30), rgb(150,152,144), rgb(121,122,114), rgb(172,180,171), rgb(170,172,172), rgb(131,140,132), rgb(131,132,132), rgb(53,52,34), rgb(52,44,34)

Citation for print

This page can be cited in the Harvard Bibliographic style using the text below:

The Fitzwilliam Museum (2024) "" Web page available at: https://data.fitzmuseum.cam.ac.uk/id/image/media-4051165230 Accessed: 2024-12-23 10:55:58

Citation for Wikipedia

To cite this page on Wikipedia you can use this code snippet:

{{cite web|url=https://data.fitzmuseum.cam.ac.uk/id/image/media-4051165230 |title= |author=The Fitzwilliam Museum|accessdate=2024-12-23 10:55:58|publisher=The University of Cambridge}}

API call for this record

To call these data via our API (remember this needs to be authenticated) you can use this code snippet:

https://data.fitzmuseum.cam.ac.uk/api/v1/images/media-13527

Bootstrap HTML code for reuse

To use this as a simple code embed, copy this string:

<div class="text-center">
    <figure class="figure">
        <img src="https://data.fitzmuseum.cam.ac.uk/imagestore/aa/aa20/M_4A_20_26_20B_1939.jpg"
        alt="Sallet"
        class="img-fluid" />
        <figcaption class="figure-caption text-info"></figcaption>
    </figure>
</div>
    

Sign up for updates

Updates about future exhibitions and displays, family activities, virtual events & news. You'll be the first to know...