Steel peytral from the armoury of the Princes Radziwill

An image of Armour/peytral. Unknown production, South German, Nuremberg. Peytral, for heavy cavalry use. Formed of a central plate and a pair of side-plates. The upper and lower edges of all three plates have plain inward turns accompanied by double recessed borders. The main plate is of trapezoidal form, widening towards its lower edge which is strongly flanged outwards. It is curved around and shaped to the horse's chest. Its upper and lower edges are bordered by nine and eleven holes, respectively, for missing lining-rivets. The side-plates fit within the lateral edges of the main-plate and are connected to them by pairs of hinges. The hinges have semi-circular cut-outs at the sides and slightly rounded ends which are in each case scalloped with seven lobes, decorated at their edges with punched semi-circles. The front end of each hinge is attached to the central plate by a pair of modern, vertically-aligned, round-headed rivets. The rear end is pierced with a hole which engages a threaded stud that protrudes through the side-plate from a round-ended, vertical bar that is attached within the latter by a pair of externally-flush rivets. The hinge is secured to the threaded stud by a modern wing-nut. Each side-plate, which is slightly curved in both the horizontal and vertical planes, has a slightly concave upper edge and a slightly convex lower edge. The latter is flanged outwards, more markedly at the front than the rear, as a continuation of the lower edge of the central plate. The front edge of the side-plate slopes upwards and rearwards very slightly to a cropped upper corner. The rear edge slopes upwards and rearwards more markedly in its lower two-thirds, curving upwards to become vertical in their upper thirds. The rear edge is cut near its centre with a vertical slot and, behind the slot, a rivet hole for the attachment of a strap that connected the peytral to the saddle. The slot in the right side-plate is placed somewhat higher than that in the left plate. The rear

Terms of use

These images are provided for non-commercial use under a Creative Commons License (BY-NC-ND). To license a high resolution version, please contact our image library who will discuss fees, terms and waivers.

Download this image

Creative commons explained - what it means, how you can use our's and other people's content.

Armour/peytral. Unknown production, South German, Nuremberg. Peytral, for heavy cavalry use. Formed of a central plate and a pair of side-plates. The upper and lower edges of all three plates have plain inward turns accompanied by double recessed borders. The main plate is of trapezoidal form, widening towards its lower edge which is strongly flanged outwards. It is curved around and shaped to the horse's chest. Its upper and lower edges are bordered by nine and eleven holes, respectively, for missing lining-rivets. The side-plates fit within the lateral edges of the main-plate and are connected to them by pairs of hinges. The hinges have semi-circular cut-outs at the sides and slightly rounded ends which are in each case scalloped with seven lobes, decorated at their edges with punched semi-circles. The front end of each hinge is attached to the central plate by a pair of modern, vertically-aligned, round-headed rivets. The rear end is pierced with a hole which engages a threaded stud that protrudes through the side-plate from a round-ended, vertical bar that is attached within the latter by a pair of externally-flush rivets. The hinge is secured to the threaded stud by a modern wing-nut. Each side-plate, which is slightly curved in both the horizontal and vertical planes, has a slightly concave upper edge and a slightly convex lower edge. The latter is flanged outwards, more markedly at the front than the rear, as a continuation of the lower edge of the central plate. The front edge of the side-plate slopes upwards and rearwards very slightly to a cropped upper corner. The rear edge slopes upwards and rearwards more markedly in its lower two-thirds, curving upwards to become vertical in their upper thirds. The rear edge is cut near its centre with a vertical slot and, behind the slot, a rivet hole for the attachment of a strap that connected the peytral to the saddle. The slot in the right side-plate is placed somewhat higher than that in the left plate. The rear

Image data

Accession Number: M.11-1947
Photograph copyright © The Fitzwilliam Museum, Cambridge.
Aperture: f/27.0
Focal length: 80
Camera: Hasselblad H3DII-31
Photographer name: Andrew Norman
Image height: 769 pixels
Image width: 1024 pixels
Processed with: Adobe Photoshop Lightroom 5.4 (Windows)
Filesize: 140.88kB
Exposure time: 1/180
ISO Speed: 200
Fnumber: 27/1
Captured: 2016:09:23 14:12:19

Citation for print

This page can be cited in the Harvard Bibliographic style using the text below:


            The Fitzwilliam Museum (2024)
            "Steel peytral from the armoury of the Princes Radziwill"
            Web page available at: https://data.fitzmuseum.cam.ac.uk/id/image/media-3481494928 Accessed: 2024-11-05 03:50:40

Citation for Wikipedia

To cite this page on Wikipedia you can use this code snippet:


            {{cite web|url=https://data.fitzmuseum.cam.ac.uk/id/image/media-3481494928
            |title=Steel peytral from the armoury of the Princes Radziwill
            |author=The Fitzwilliam Museum|accessdate=2024-11-05 03:50:40|publisher=The
            University of Cambridge}}

API call for this record

To call these data via our API (remember this needs to be authenticated) you can use this code snippet:

https://data.fitzmuseum.cam.ac.uk/api/v1/images/media-200185

Bootstrap HTML code for reuse

To use this as a simple code embed, copy this string:

<div class="text-center">
    <figure class="figure">
        <img src="https://data.fitzmuseum.cam.ac.uk/imagestore/aa/aa35/large_M_11_1947_1_201609_adn21_dc2.jpg"
        alt="Peytral"
        class="img-fluid" />
        <figcaption class="figure-caption text-info">Steel peytral from the armoury of the Princes Radziwill</figcaption>
    </figure>
</div>