Skip to main content

Burgonet: HEN.M.80-1933

Object information

Current Location: Gallery 31 (Armoury)

Maker(s)

Production: Unknown

Entities

Categories

Description

Burgonet, for infantry or light cavalry use. Formed of a one-piece skull with an integral peak, a pair of hinged cheek-pieces, and a neck-defence of one lame. The skull rises to an acute point at its apex and is divided into four boxed panels by medial and transverse ridges that converge at the point. The front edge of the skull is flanged forward to produce a prominent, slightly down-turned peak, the front edge of which curves forward to a fairly obtuse, central point, and has a file-roped inward turn accompanied by a recessed border. The rear edge of the skull is flanged outwards at the nape to receive the neck-defence. The lower edge of the flange is slightly cusped at its centre and outer ends where it is pierced with rivet-holes to attach the neck-defence. A later hole pierced just to the inside of the left outer hole is plugged with a rivet. The lower edge of the skull is cut away in a large arch at each side to accommodate the cheek-pieces. The apex of each arch is cut with a shallow, rectangular notch to accommodate the hinge of the cheek-piece. The front of the skull is fitted just above the peak with five externally-flush lining rivets, of which the central one lacks its flat, internal head. The edge of the cut-out for the right cheek-piece is repaired, just above the notch for the hinge, with a riveted internal patch. The edge of the cut-out for the left cheek-piece is cracked and pierced with a hole, possibly for a missing lining-rivet, at the same point. The cheek-pieces overlap the skull and are attached to it by modern, plain, internal hinges with cropped corners, secured by pairs of modern, round-headed rivets. The front and lower edges of each cheek-piece, which are respectively slightly concave, and flanged outwards as a continuation of the neck-defence, have file-roped inward turns accompanied by recessed borders. The upper and rear edges of each cheek-piece curve in to a straight section at the hinge. The centre of each cheek-piece is slightly embossed and pierced with four holes surrounding a further single hole. The lower front corner of each cheek-piece is fitted with a modern, internal leather loop secured by a modern round-headed rivet and circular, internal washer. The upper front corner is cut with a rectangular notch to accommodate the outer edge of the peak. The neck-defence of one lame is attached to the flanged rear edge of the skull by a modern round-headed rivet and circular internal washer at either end. Its lower edge which curves down to an obtuse, central point, has a file-roped inward turn accompanied by a recessed border which is pierced with a pair of later holes.

Notes

History note: From the Mappin Collection sold by Christies, London, 21 July, 1925, lot 100. Mr James Stewart Henderson of 'Abbotsford', Downs Road, St Helen's Park, Hastings, Sussex.

Legal notes

J.S. Henderson Bequest

Measurements and weight

Depth: 25.3 cm
Height: 23.4 cm
Weight: 1.131 kg
Width: 19.8 cm

Acquisition and important dates

Method of acquisition: Bequeathed (1933-03-16) by Henderson, James Stewart

Dating

16th Century, Mid#
Production date: circa AD 1550

Note

A burgonet consists of a skull to protect the head and two cheek pieces attached by hinges just behind the ears, to protect the sides of the face – the whole helmet held in place by a strap under the chin. This very open form of helmet, which was very easy to put on and take off, became very popular throughout Europe in the second half of the 16th century and was used by lightly armed and armoured foot soldiers and horsemen.

South German

The helmet is bright with light patination overall and some heavier pitting on the skull, especially at the peak, point and nape.

The presence of two holes in the neck-flange of the skull, for which no corresponding holes exist in the neck-defence, suggest that the latter is a replacement. This may also be true of the cheek-pieces which have poorly formed rear and upper edges. The neck-defence and cheek-pieces show a different patination to the skull.

Components of the work

Borders
Cheek-pieces
Decoration
Parts
Skull Decoration

Materials used in production

Steel

Techniques used in production

Hammered : Formed of a one-piece skull with an integral peak, a pair of hinged cheek-pieces, and a neck-defence of one lame; hammered, shaped, riveted, with file-roped and embossed decoration, and recessed borders
Patinating
Formed

Identification numbers

Accession number: HEN.M.80-1933
Primary reference Number: 18491
Stable URI

Audit data

Created: Saturday 6 August 2011 Updated: Wednesday 14 April 2021 Last processed: Thursday 7 December 2023

Associated departments & institutions

Owner or interested party: The Fitzwilliam Museum
Associated department: Applied Arts

Citation for print

This record can be cited in the Harvard Bibliographic style using the text below:

The Fitzwilliam Museum (2024) "Burgonet" Web page available at: https://data.fitzmuseum.cam.ac.uk/id/object/18491 Accessed: 2024-03-28 13:23:03

Citation for Wikipedia

To cite this record on Wikipedia you can use this code snippet:

{{cite web|url=https://data.fitzmuseum.cam.ac.uk/id/object/18491 |title=Burgonet |author=The Fitzwilliam Museum|accessdate=2024-03-28 13:23:03|publisher=The University of Cambridge}}

API call for this record

To call these data via our API (remember this needs to be authenticated) you can use this code snippet:

https://data.fitzmuseum.cam.ac.uk/api/v1/objects/object-18491

More objects and works of art you might like

Burgonet

Accession Number: M.1.4E-1936

Burgonet

Accession Number: M.19-1938

Half armour

Accession Number: HEN.M.5A-E-1933

Half armour

Accession Number: HEN.M.4A-D-1933

Suggested products from Curating Cambridge

You might be interested in this...

Sign up for updates

Updates about future exhibitions and displays, family activities, virtual events & news. You'll be the first to know...